Kargo Master » Products

Clamp & Lock For Transit Connect

Marscelles — Wed, 18 Jan 2012 16:02:27 +0000

Whatever it may be, this ladder rack will transport it securely to wherever your job takes you.

The Kargo Master Clamp & Lock Ladder Rack is uniquely designed to easily lock and secure ladders in place. The lockable clamp arm can be easily reached and locked to provide extra security. Ladder grips are adjustable to secure extension and step ladder of all sizes. The ladder rack with rugged crossbow design is low over van roof to reduce overall vehicle height and to facilitate loading and unloading.

The Clamp & Lock Ladder Rack is installed using wide mounting feet that mount directly in to FACTORY bosses to provide maximum support and stability, and they allow for easy, no-drill installation. Kargo Master Clamp & Lock Racks are treated with zinc primer and chip-resistant marine grade powder coat to provide excellent corrosion, rust and UV resistance.

_______________________________________________________________________________________

#40804 – Clamp & Lock Ladder Rack For Ford Transit Connect (curb side only)
#40813 – Driver Side Clamp & Lock Mechanism White (OPTIONAL)

Mobility Van Side Steps

Marscelles — Wed, 18 Jan 2012 15:34:42 +0000

– Heavy-Duty 10” wide 14 gauge steel steps and thick rigid mount brackets support passengers of all sizes.
– Steps have raised perforations for superior traction. Rain and snow drain through.
– Steps are made with galvanized steel and coated with zinc epoxy prime for superior corrosion protection.
– Finish powder coat is handsome metallic silver.
– Step sides have “Reflective Marking Tape” for extra safety.

Emergency Light Bar Mount

Marscelles — Thu, 03 Nov 2011 18:01:17 +0000

Part # 38020

Round Emergency Light Bracket

Marscelles — Thu, 03 Nov 2011 17:48:59 +0000

Part # 38010

Ratchet Strap Tie Downs # 40850

Marscelles — Mon, 31 Oct 2011 17:41:44 +0000

THE WORLDS BEST CARGO RETENTION SYSTEM

Utility Van rack uprights are specially made to mount retractable strap mechanism.

Securing ladders, sheet goods or building materials has never been easier.

Release the retractable ratchet strap.
Wrap around your cargo and hook into the rack upright.
Flick the ratchet lever and BAM, everything is locked down.

No more fumbling with loose bungee cords or straps.

You will save enough time to pay this Rack + Ratchet Strap system off in a month.

Welded Racks

Marscelles — Tue, 11 Oct 2011 16:17:30 +0000

Myth: A one piece rack is better.

Reality: One piece racks

Conduit Box with Conduit

kargo — Fri, 30 Sep 2011 22:31:25 +0000

Carrying stall safely secures tubing or pipe to your rack. Made of heavy gauge powder coated steel. Includes complete mounting bracket kit. Use with our load dividers or when boxes are used in pairs, cargo can be locked to prevent theft.

Load Dividers #31020

kargo — Fri, 30 Sep 2011 16:46:36 +0000

These handy uprights (sold in sets of two) clamp to the rack crossbars. Use to prevent loads of conduit or lumber from “fanning out”. Use to secure canoes, kyacks, surfboards, etc.

EZ Adjustable Shelving

Marscelles — Fri, 30 Sep 2011 15:42:19 +0000

FEATURES AND BENEFITS

Convenient formed shelf supports and permanent “pressedin” fasteners enable you to assemble EZ shelf units in only 15 minutes. Contoured end panels provide flush fit to van side, widest possible van aisle.
Contoured full steel shelf back provides additional strength and convenience.
Position the middle shelf to accept Kargo Master standard drawer cabinets, or select two other practical shelf heights. Or, install an accessory 4th shelf. Middle shelf height can be adjusted with shelf unit mounted in the van.
Each shelf comes with built-in 2” lips to contain cargo.
EZ shelving is thoughtfully designed to reduce noise and rattle.

All Welded Shelf Units for Vans

kargo — Thu, 29 Sep 2011 21:34:07 +0000

Feature and Benefits

All shelves rest on half shear buttons for additional strength and support. Shelves welded to end panels offer additional support and eliminates annoying rattle.
No assembly required reduces installation time and saves you money.
Contoured top enables flush fit for shelves against van walls.
Welded steel support back panels provide additional support and rigidity.
Shelving is coated with hard scratch and chip resistant powder coat.
Three widths available 42”, 74” (carries items up to 70” long), and 84” (carries items up to 80” long)
2 ¾” shelf lips INCLUDED

Part # 40420 – Welded Shelf Unit 42”W x 46”H x 14”D
Part # 40740 – Welded Shelf Unit 74”W x 46”H x 14”D
Part # 40840 – Welded Shelf Unit 84”W x 46”H x 14”D
Part # 40424 – Sprinter Welded Shelf Unit 42″ W x 58″ H x 14″ D